LED Replacement bulbs for halogen lamps
We've waited quite a few years for industrial facilities to make LED replacements for halogen light bulbs that have been perhaps not over-sized, offered an omnidirectional light spread, and provided enough lumens the task available. In stock today, LED G4, G9 and BA15S replacement bulbs. You are going to typically discover this halogen bulb in a puck light or a reading lamp.
Halogen bulbs provide a fantastic light output, nonetheless they may be tricky for many reasons. First of all, they tend burning hot plus don't have such a good life span. You need to make use of care to not ever touch the light bulb as oil from your fingers trigger a halogen bulb to own an even reduced expected life or burn up straight away, as well as melt. You have no these types of worries with Light-emitting Diode replacement bulbs.
We now have three types in stock: Shown above from left to right -
BA15S LED Bulb - this is certainly a bayonet solitary contact base which twists and locks into location. Its a 12 V LED light bulb, perhaps not dimmable, and is not maybe not for usage in totally enclosed fixtures. Utilize our LED BA15S in dried out places just. It really is a T3 replacement.
JC/G4 LED Bulb - this really is a two pin G4 base. It really is a 12 V LED light bulb, perhaps not dimmable, and not for usage in totally enclosed fixtures. Use our LED JC/G4 light bulbs in dry areas just. It's a T3 replacement.
G9 LED Bulb - that is a-two pin G9 base. It is a 120VAC feedback LED light bulb, it is dimmable. It is not to be used in completely enclosed accessories. Use within dry places only. It's a T4 replacement.
Making certain these LED halogen light bulbs replacements will fit your installation:
Your light bulb should always be clearly marked, but if it isn't:
Very first determine the voltage. Our BA15S and G4 light bulbs work at 12V. You can find halogen bulbs available to you at 24 and 48 volts, so be sure yours is 12V before you decide to proceed. Warranty cannot protect burning up out a 12V bulb by making use of 24 or 48 volts to it. Our G9 bulbs tend to be 120VAC just.
Next, gauge the length between your pins. Be exact, as you will find all kinds of halogen bulbs nowadays with different spacing. Quite broader or a little smaller, and these light bulbs only will unfit. There are additionally halogen bulbs with looped pins. Our Light-emitting Diode replacement bulbs will not easily fit in this sort of plug.
If for example the measurement is 4 millimeters between pins, this means you have got a G4 base bulb.
If your measurement is 9 millimeters, you have got a G9 base light bulb, which only is available in 120 volts.
When your dimension is merely a hair larger than 6 millimeters, you've got a light bulb with a G6.35 base, which will come in 12, 24, or 120 volts. A measurement of 8 millimeters implies you've got a G8 base xenon light bulb, Our Light-emitting Diode replacement light bulbs cannot fit in these fixtures.
Share this Post
T8 LED Replacement Bulbs
T8 light bulbs are generally utilized for company lighting effects and can be applied in both parabolic and indirect light…Read More
Light bulbs LED Replacement
Energy Star-qualified 60-watt replacement CFLs tend to be as bright as regular incandescents, use about 75 % less energy…Read More